Bag changing, Caution – Kenmore ASPIRADORA 116.29914 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BAG CHANGING
For best cleaning results, the dust bag
should be changed often. The CHECK BAG
indicator will come on when the bag needs
to be changed or the airflow is blocked.
NOTE: See PARTS AND FEATURES for
Bag Number.
1. Turn off and unplug vacuum cleaner.
2. Remove hose
from canister,
3. Pull hood
release out and up,
then lift canister
hood
4. Disengage
cardboard tab from
red bag mount by
pulling away and
lifting up.
5. Pull bag out of the
red bag mount.
Motor
Safety
Filter
6. Check the
motor safety filter
and replace, if
necessary..
7. The red bag mount will flip forward after
removing bag. This will prevent the hood
from dosing until a new bag is installed.
Note: DO NOT bend or crease the
middle of the cardboard when installing
the bag into the bag mount slots.
8. Rotate red bag
mount down and
install bag into slots
per illustration,
pushing down until
the cardboard tab
locks into position
and the holes align.
9. Tuck the bag securely into the bag cavity
so that none of the bag is able to be pinched
by the hood.
10. Close and latch canister hood.
11. Insert hose into canister until it snaps in
place
12. Plug cord into wall outlet.
.CAUTION
NEVER REUSE A DUST BAG Very fine
materials, such as carpet freshener,
face powder, fine dust, plaster, soot,
new carpet lint, etc. can dog the bag
and cause it to burst before it is full
and may cause damage to vacuum
cleaner motor. Change bag more often
when vacuuming these materials.
16