Bulb changing, Warning, A caution – Kenmore ASPIRADORA 116.29914 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BULB CHANGING
^WARNING
Electrical Shock Or Personal Injury
Hazard
Turn off and unplug vacuum cleaner
before performing maintenance to the
vacuum cleaner. Failure to do so
could result in electrical shock or
personal injury from the vacuum
cleaner suddenly starting.
A CAUTION
Do not plug in or turn on until the vacu
um cleaner is completely reassembled.
1,
Turn off and unplug vacuum cleaner
from electrical outlet.
2. Pry tight
lens out at
slots as shown
on both sides.
Rotate lens up
and lift off,.
3. Remove the light
bulb by pulling straight
out.
A CAUTION
Do not use a bulb rated over 9W {i3V},
During extended use, heat from the
bulb could overheat surrounding plastic
parts.
4. To replace the
light bulb, carefully
insert fully into slot,
Note: See PARTS AND FEATURES
for bulb number.
5. To replace light
lens, place tab at front
of lens into slot.
6. Rotate lens down
and firmly snap into
place.
21