H1-power7 “multi-power” cooking, B “hi-power”/‘‘multi-power” cooking – Kenmore 88329 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
“H1-POWER7 “MULTI-POWER” COOKING
“HI” gives the highest cooking power possible with your microwave oven. It is the recommended setting for cooking
foods with high moisture content or for cooking foods that need fast cooking to maintain their natural flavor and tex
ture. Many foods need slower cooking (at less than full power) in order to give you the best results. In addition to '“HI”
there are ninety-nine multi-power settings. The cookbook tells you which power setting is recommended for the food
being cooked.
To Cook
1. Touch CLEAR, and a beep tone will be heard. The
CLEAR erases all previous settings.
2. Touch TIME. “0” will show in the display window.
3. Touch the correct numbers on the control panel to set
the cooking time. The time set will show in the display
window at the top of the control panel. For example:
® To set 30 seconds, you would touch “3” and then
“
0
”.
® To set
3
minutes, touch “3”, “0” and “0”.
» To set 3-1/2 minutes, touch “3”, “3” and “0”.
Remember, the timer is a digital clock that is divided
into 60 seconds. Therefore, 1/2 minute is equal to 30
seconds. Touch 30 and not 50 (as with a calculator) to
indicate 1/2.
4. Touch POWER CONTROL. The word “HI” will
show in the display window until a lower setting is
entered. This is to tell you that the oven will be
operating on “HI” unless a different power setting is
chosen.
5. Touch numbers for desired cooking power level. For
example, if the recipe calls for cooking at the “80
(REHEAT)” setting, you would touch "8” and “0”. The
display window will show “80”. This means that in the
REHEAT setting, the oven is cooking at power level
80.
NOTE: It is not necessary to touch POWER CONTROL
when cooking with the highest power (“HI”). To set
“HI-POWER” Cooking, skip steps 4 and 5 above.
However, if POWER CONTROL is touched. The word
“HI” will show in the display window. This is to let you
know that the oven will be operating on “HI” power
unless a different power setting is chosen.
6. Touch START. The oven begins to cook and the
display window will show the time counting down in
minutes and seconds. A tone will sound and the word
“End” will show in the display window for two seconds
when the cooking time is completed. The oven will
automatically shut off.
EXAMPLE: To warm 5 dough
nuts, you would use power level
“80 (REHEAT)” for 45 seconds.
To do this, follow these six steps:
1. Touch CLEAR.
2. Touch TIME.
3. Set 45 seconds by touching “4”
and then “5”. “45” will show in
the display window.
4. Touch POWER CONTROL.
The display window will show
“HI”.
5. Choose the “80 (REHEAT)”
setting by touching the num
bers “8” and “0”. The display
window will show “80”. This
means the oven is cooking at
power level 80.
6. Touch START. The oven
begins to cook and the time will
begin to count down in the
display window.
A tone will sound and the word
“End” will show in the display
window for 2 seconds when the
45 seconds are over. The oven
will automatically shut off.
NOTE: If you want to keep the
food warm after finishing the
cooking cycle, you can use “Hold
Warm” feature. For detailed in
structions on using “Hold Warm”
feature, see page 12.
Kenmore
mmcAj
CECJ3CA]
[
t
DCZ/CZJ
0
..
EXCEED EE-)
DOOR f
5
R.E
4
.
5
e
o
Kenmopie
□□LiDm
mciDCj]
DOORFCLEAS.
mmren
DgO 16