Kenmore 88329 - Manual (Page 11)

RECALL AND CHANGE OF SETTINGS
To Recall a Setting
To recall (check) a setting before you start the oven, follow the directions below -
9 To check the setting for a given stage, touch MEMORY/ RECALL one or more times until the correct stage
light and indicator light turns on. The set TIME or TEMP CONTROL for that stage will show in the display
window.
• To check the cooking power level, touch POWER CONTROL.
To recall (check) a setting while the oven is operating, follow the directions below.
» To check settings while the oven is operating, touch the desired pad to recall the setting for the operating
stage.
• To recall a future stage, touch STOP, follow the directions above for recalling (checking) a setting before
starting the oven, and then touch START to continue cooking.
• To recall TIME OF DAY while the oven is running, touch TIME OF DAY. It will show momentarily in the
display window.
• To check the cooking power level during cooking, touch POWER CONTROL.
Power level will show momentarily in the display window.
To Change a Setting
Recall the setting to be changed by following the directions above and make the change as follows:
• Touch STOP ............................................... The oven will stop cooking.
• Touch TIME ............................................... Then touch "O" until only one "O" shows in the display
window. Set the cooking time.
• Touch TEMP CONTROL .......................... Set food temperature.
« Touch POWER CONTROL........................ Set cooking power level. To reset to “HI", set “99”,
maximum power.
11