GE 29831 - Manual (Page 27)

ANSWERING
SYSTEM OPERATION
O.
Erasing
Your
Messages
To erase all your messages without playback, press the ERASE
button.
To erase a specific message, press ERASE button while that
message is playing.
P.
When
Memory
is Full
When the system’s memory is full, the MESSAGES indicator will
flash rapidly. The unit will answer on the tenth ring. A VOICE will
announce “Memory is full, please enter security code after tone.’’ If
the caller does not enter the unit’s (factory set-3 digit) security code
within 7 seconds, the Answer-Phone™ will hang up. To make room
for new messages, press
PLAY to allow for deletion of some
messages. (See section on Remote Operation on page 27.)
Q,
When the
Answer
Function is
Off
When off, the answer function will answer on the tenth ring and a
voice will announce “Answer functions are off, please enter security
code after tone’’ and wait for your security code to be entered.
R.
Answerer
Reset
If the unit does not seem to be functioning properly, pull the AC/DC
POWER ADAPTER from the POWER 9VDC Jack on the back of
the Answerer. Wait at least 5 seconds and plug back in. All
messages/memos will be erased. Time and Day have to be re­
entered and the announcements re-recorded.
Note: Disconnecting the AC/DC POWER ADAPTER at the 110 VAC
wall plug will not reset the answerer.
24