GE 29831 - Manual (Page 10)

CONTROLS
& FEATURES
1. Hook Switch - Connects and disconnects the telephone line.
2. Handset Hook - Holds the handset in place when mounted
on the wall.
3. Handset - Contains transmitter and receiver for phone
conversation.
4. Directory Card - Listing space for names/numbers in phone
memory.
5. Base Jac/f-Jack for coil cord.
6. Handset Jack- Jack for coil cord.
7. (*) and (#) Buttons - Used in touch tone mode for special
service functions.
8. Redial Button - Redials last number dialed and acts as pause
function in memory storage of phone numbers.
9. Flash Button - Creates a signal for special services such as
call waiting.
10. Hold Button - Places call on hold.
11. Line In Use Indicator - Shows when line is in-use (solid red)
or when phone is on hold (flashing red).
12. Telephone Key Pad- Dials, enters phone numbers into phone
memory, and selects 1-9 stored numbers.
13. Memory Dial Button - Dials stored phone numbers.
14. Memory Store/ln Button - Stores phone numbers in phone
memory.
15. Emergency Quick Dial Buttons - Provide instant dialing
of up to 3 important telephone numbers by pressing
A, B, or C.
16. Phone Line Jack - Connects the supplied modular cord.
17. Base Plate - Used to adapt the phone to either table top or
wall mount installation.
18. Ringer Volume - S e t s ringer volume Hi, Lo, or Off.
19. Pulse/Tone Switch - Sets the dialing mode to match your
phone system.
C.
Telephone
Controls