GE 29831 - Manual (Page 20)

TELEPHONE
MEMORY OPERATION
When storing a number, a momentary delay may be needed in the
dialing sequence for a stored telephone number. This is generally
used when a “PAUSE” is needed to wait for a dial tone (e.g. after
dialing a long distance access number). The
REDIAL button should
be pressed at the point where a pause is needed in the dialing
sequence. During storage, pushing the
REDIAL button serves to store
a pause in the dialing sequence as often as needed. (Note; Each
pause counts as one digit in the sequence.)
Example: 123 REDIAL 456-789-0123
Emergency/Quick Dial Numbers
1. Pick up HANDSET.
2. Wait for Dial Tone.
3. Press A or Бог
C.
Frequently Called Numbers in Memory
1. Pick up HANDSET.
2. Wait for Dial Tone.
3. Press
DIAL.
4. Press /, or 2..., or 9.
This feature allows you to dial in succession a chain of numbers in
different memory locations. This is useful when you must dial more
than one number in memory to complete a call, such as with frequent
calls via an independent service (e.g. MCI or Sprint).
For Example: Memory Location
Local Access Number of Long
distance company, and 2 or 3 6
pauses at end
Authorization Code (ID)
7
Long distance phone number 8
To initiate Chain Dialing
1. Press DIAL.
2. Press 6.
3. Press DIAL.
4. Press 7.
5. Press DIAL.
6. Press 8.
D.
Storing a
Pause in
Dialing
3 ) ) о
E.
How to Dial
a Stored
Number
IMEFOINCY QUICK DIAL
A B C
(O О O)
F,
How to
Chain Dial
Using the
Memory
17