1 install the batteries, Reverse the handset hook, Remove the base plate – GE 29831 User Manual

Page 15: Connect the power cord, Installation - wall mount

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

INSTALLATION - WALL MOUNT

ISi

iiliiiiliiiliiiiii;

t tl

. ^

..........

©i

C. Installation for Wall Mount Use

Install the Batteries

Open the battery cover located under the

handset and number directory with a
screwdriver.

Insert 4 AAA Alkaline Batteries paying attention

to the polarity in the holder and replace the
cover. The black ribbon goes under the

batteries. Leave the end exposed to allow easy

removal when batteries need to be replaced.

Reverse the Handset Hook

Firmly slide the

HANDSET HOOK

out of the

cradle. Rotate it 180'" and slide it back into the

cradle.

Remove the Base Plate

For wall mount installations,

- Press in the two tabs and pull the

BASE

PLA TE

from the back of the telephone.

Note: For future reference, please copy your 3-digit security code
located on the back of the unit.

PRESS IN

TABS

Connect the Power Cord

Insert the right angle plug of the

POWER

CORD

into the

POWER JACK

on the back of

the telephone.

Note: Do

not

plug Power Supply into wall outlet

until all other steps are completed.

Note: During power outages the Answering system will not function

even though batteries are installed. The telephone, however, will

remain operational. The backup batteries will retain your

announcement and messages, and clock for over 24 hours.