Back panel, Appendix: reference – GE VG4275 User Manual

Page 58

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

APPENDIX: REFERENCE

Back Panel

CH3 CH4 switch

Selects the VCR signal channel. This is the

channel the TV must tune to in order to see the VCR's images.

Necessary if connecting the VCR using one of the basic hookups.

AUDIO (L and R) and VIDEO IN Jacks

Receives signals from

another component (like a VCR or camcorder) when it is

connected to the VCR with these jacks. Use INPUT on the VCR's

remote control to select LI (Line Input). Hi-Fi or mono signals as

well as video can be recorded when the external device is

connected to the VCR with these jacks.

AUDIO (L and R) and VIDEO OUT Jacks

Sends signals from

VCR to another component (like a TV or VCR) when connected to

a TV using these jacks.

ANT IN jack

Receives a signal through a coaxial cable from an

antenna or cable system when attached with this jack.

OUT TO TV jack

Passes a broadcast signal to a TV when connected

using the coaxial cable supplied.