GE VG4275 - Manual (Page 50)

CONNECTIONS
Connecting Your VCR
Refer to these pages to help you connect your VCR.
Jacks and Cables
RF Jacks and Coaxial Cables (F-type)
The RF jacks provide good picture and mono sound
quality, and must be used if audio/video connections are
not available for your TV.
These jacks are required for antenna or cable-TV
connections. The RF jacks on the VCR are labeled ANT.
IN and OUT TO TV. The coaxial cable supplied with your
VCR is used to connect the VCR's OUT TO TV jack and
your TV's antenna input.
R F Jack
Audio/Video Jacks and Cables (RCA-type)
The AUDIOA/IDEO jacks provide very good picture
quality and stereo sound, and can be used if your TV has
audio/video input jacks.
These jacks are used for most audio/video connections
between components. The VCR AUDIO/VIDEO jacks are
color coded (yellow for video and red and white for
audio). If your TV only has one input for audio (mono),
you may need a Y-adapter to hear sound from both
channels of the VCR.
©
Audio/video Jack
(Ot=
48