GE VG4275 - Manual (Page 51)

CONNECTIONS
Choosing a VCR Connection
There are several different ways to connect your VCR,
depending on whether or not you have cable service, if
you have a cable box to see this service, whether some of
the cable channels are scrambled, and so on.
Three connections are described in this section and one of
them should provide you with a VCR connection that
works.
• TV with RF jack only
• TV with audio/video jacks
• TV with audio/video jacks and cable box to unscramble
pay channels only
If you need to connect additional components not shown
in the diagrams here (and are unsure of how to connect
them), refer to the instruction manual that came with that
particular component.
Advantages of Audio/Video Connections
Using a simple coaxial cable connection gives you good
picture quality. If your television has audio/video jacks, I
highly recommend using them to get even better picture
quality and stereo sound when recording and playing back
videotapes. These connections give you more convenient
operation by not having to share the TV's antenna signal.
Don’t Forget About the Auto TV/VCR Feature
The TV/VCR switch controls whether the picture signal is coming
from the VCR or the TV.
Set the Auto TV/VCR feature to ON when you use only the RF
ANT. IN and OUT TO TV connections and OFF when using the
AUDIO/VIDEO OUT jacks—so your TV signal is not interrupted
when the VCR is turned on.
49