GE VG4275 - Manual (Page 44)

OTHER FEATURES
3. Press CLEAR to reset the counter to 0:00:00.
Z E R O S E A R C H
4. Continue playing the tape. C u r r e n t t a p e c o u n t e r i s
2 : 1 7 : 2 5
5. Press STOP.
P r e s s R E V t o g o t o
6. Press SEARCH on the remote twice to display the
0:00:00
ZERO SEARCH menu.
P r e s s S E A R C H t o e x i t
7. Press REVERSE to return to 0:00:00 on the tape.
Commercial Scan (SEARCH Button)
This is useful for skipping commercials or short program
segments.
• Press SEARCH once during playback to advance the
tape approximately 30 seconds of recorded material.
• Each press of the SEARCH button adds an additional
30 seconds up to five minutes.
Z E R O S E A R C H
S e a r c h i n g f o r
0 : 0 0 : 0 0
P r e s s S T O P t o c a n c e l
Tracking
Your VCR has automatic tracking which removes the
streaks or snow from the picture. Automatic tracking is
activated when you insert a tape or turn on the VCR.
Occasionally you may need to manually adjust tracking,
especially if the tape was recorded on a different VCR.
Just use the TRACKING buttons to remove the streaks or
snow. You can also use tracking when you pause a tape to
reduce jittering of the picture.
When you manually adjust the picture, automatic tracking
is turned off. To turn automatic tracking back on, press
both TRACKING buttons on the front of the VCR at the
same time, or eject the tape and re-insert it. Tracking has
no effect during recording - only playback.
Pro-Tect Plus™ Locking Feature
To disable the usage of the VCR, or to protect your timer
recordings, you can lock the VCR so that the buttons on
the VCR or remote won't work.
• To Lock: Press and hold the VCR button on the remote
for approximately six seconds. "SAFE" will be
displayed on the VCR's front panel when it is locked.
Locking Your VCR:
If a timer recording is programmed,
make sure your VCR is turned off.
Locking your VCR prevents the VCR
from being accidentally turned on.
42