Setting port alarms, Setting port alarms -8 – Cabletron Systems EMM-E6 User Manual
Page 58
Alarm Configuration
3-8
Setting Module and Port Alarms
7.
If you select Yes for Disable Module on Alarm, the defined condition will
cause the device to disable the module.
8.
Click mouse button 1 on
.
Setting Port Alarms
1.
In the Alarms window, click mouse button 1 on a repeater selection in the
scroll list.
2.
Click mouse button 1 on
to open the Set Port Alarms window.
Figure 3-4. Set Port Alarms Window
NOTE
If a module is disabled by an alarm, you must manually re-enable the module before it can
again pass traffic. Resetting the device does not re-enable the module.