Installing your convection microwave oven, Installation instructions – Whirlpool MC8991XT User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation instructions
BEFORE YOU BEGIN, READ THE FOLLOWING INSTRUCTIONS COMPLETELY AND CAREFULLY.
Installing your convection microwave oven
1
. Empty the oven and clean inside it with a
soft, damp cloth Check for damage such as
misaligned door, damage around the door or
dents inside the oven or on the exterior, if there
is any damage, please do not operate the unit
until it has been checked by an authorized
Whirlpooi service technician and any repairs
made.
3. Do not block the vent and air intake open
ings on the back and the bottom of the oven.
Blocking vent or air intake openings can cause
poor cooking results.
Make sure the oven legs are in place. Do not
set the oven on anything that will block the air
intake openings.
2. Put the oven on a cart, counter, table or shelf
that is strong enough to hold the oven, the food
and the utensils you put in it. (The controi
panei side of the unit is the heavy side. Use
care when handling.) The weight of the oven
is approximately 56 lbs. (25.2 kg).
4. Do not install the oven next to a conven
tional surface unit or in any area where
excessive heat and steam are generated.
This could damage the outside of the cabinet.
continued on next page
35