Changing settings, Using broil time, Touch broil time – Whirlpool MC8991XT User Manual
Page 28: 1 i 2, Touch number pads for the broiling time you want
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1. Touch PROBE TEMP
2. Touch Number Pods for the desired final temperature.
3. Touch BAKE TIME. (Touch TEMP RESET to change oven temperature, if desired.)
4. Touch START.
5. When oven reaches selected temperature:
a. Insert the Temperature Probe into the food. (See page 17.)
b. Place food in the oven and plug the probe into the socket on the oven ceiling. (Use care when
inserting the probe. Oven walls will be hot.) Close the door.
c. Touch START.
Changing settings
• To change a time setting before or otter starting the oven, touch BAKE TIME, touch number pads for
new time setting, then touch START.
• To change a temperature setting before or after starting the oven, touch TEMP RESET, touch number
pad for new temperature setting, then touch START.
• Microwave power can be added to BAKE TIME by touching COOK POWER, the new power level,
then START. (See "Combination cooking," page 30 .)“P-0" will show on the Display when COOK
POWER is touched.
• If probe is plugged in during Preheat, the Display will show “Prob" for 2 seconds, then “Errt’ "Err"
will stay on the Display until probe is removed. Remove probe. Close the door. The Display will
return to the previous setting. Touch START.
Using BROIL TIME
The BROIL TIME cycle automatically cooks food Items at 450°F in convection cooking. This cycle
can be set up to 199 minutes, 99 seconds of cooking time. No other cooking cycle can be used with
Broil Time. This cycle requires preheating before the food is placed in the oven. The preheating
time wili be approximately 15-20 minutes. NOTE: Oven must be preheated before broiling.
Always place food directly on the lower oven rack when broiling. A utensil is not required.
NOTE: Some smoke coming from the vent at the back of the oven is normai when broiiing.
Using the temperature probe with BAKE TIME
DO THIS...
THIS HAPPENS...
1.
Touch BROIL TIME.
The CONV indicator Light will come on
and the Display will show "000:00."
1
I
2
2.
Touch Number Pads for the
broiling time you want.
I z i n n
I
/_
u u
The Display will show the numbers you
touched in the order you touched
them. This example shows 12 minutes.
3.
Touch START.
U U L U
I
/ ' / _ / /
The PREHEAT and CONY Indicator
Lights will come on and the Display
will show "PREH."
When the oven temperature reaches
150°F, the Display will show the internal
oven temperature for every 5°F
increase.
28