Standing time, About the “quick defrost” cycle, Changing or adding detrost time – Whirlpool MC8991XT User Manual
Page 16: Beep&eep&eepeeep
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
/_
_
J
L I I L I
BEEP&EEP&eEPeEEP
When the Cook cycle ends, "End" will
show on the Display and 4 beeps will
sound. (You oan stop the beeping by
opening the door or by touching CAN
CEL.) "End" will remain on the Display
and a beep will sound every 60 sec
onds (to remind you that food is left in
the oven) until the door is opened or
CANCEL is touched. The Display will
then show the time of day.
Standing time
For best results, allow the food to stand for a while after defrosting. This helps equalize the
temperature of the food for more even defrosting.
When any cooking function except BROIL TIME follows QUICK DEFROST, the oven automatically
provides a standing time equal to the time touched in for QUICK DEFROST. The cooking cycle will
begin after the automatic standing time. NOTE: If the door is opened during the standing time,
the timer will stop until the door is closed and START is touched.
About the “QUICK DEFROST” Cycle
The electronic control oven automatically divides the time set for the QUICK DEFROST Cycle into
three equal parts:
First part........................................................................................................................... 80% of full Cook Power
Second part...................................................................................................................... 50% of full Cook Power
Third part.......................................................................................................................... 20% of full Cook Power
This automafic step-down in Cook Power helps defrost food quickly and completely.
Changing or adding detrost time
You can change the defrosting time before or after touching START.
• Touch QUICK DEFROST.
• Touch numbers for new time.
• Touch START.
Any new time setting made while QUICK DEFROST is operating wiii continue the defrosting at
20% of full power.
The best time to change the setting is near the end of the QUICK DEFROST Cycle.
• Open the door.
• Check the food with long-tined fork; if center area is hard frozen, set additional time. Remember
that standing time Is necessary to complete defrosting.
• Close the door and touch START to continue the cycle if no additional time is needed.
OR...
• Touoh in new instructions for additional defrosting time.
16