Using pause with auto sensor, Adding pause to cycle in operation, Adding pause to cycie not in operation – Whirlpool MC8991XT User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using PAUSE with AUTO SENSOR
Pause may be used to stop the oven when it advances from the automatic portion of the cycle to the
timed portion.
1. Put food in the oven and cióse the door,
2. Touch AUTO SENSOR.
3. Touch a Number Pad for the cooking category you want.
4. Touch PAUSE.
5. Touch START.
When the first part of the AUTO SENSOR cycle is done, you will hear 2 beeps and the oven will shut off.
6
.
Open the door. Stir or turn the food or add ingredients. Close the door.
7. Touch START to continue.
NOTE: The oven will remain off until you touch START.
Adding PAUSE to cycle in operation
Pause can be added to COOK, QUICK DEFROST or AUTO SENSOR or between COOK and ROAST TIME
after START has been touched.
1. Touch PAUSE.
2. Touch START.
Adding PAUSE to cycie not in operation
Pause can be added to a cycle that has been programmed, but has not started.
1. Touch cycle that you want to pause.
2. Touch PAUSE.
3. Touch START.
The oven will automatically stop halfway through QUICK DEFROST or COOK to allow you to turn over
or rearrange the food being cooked or defrosted. It will stop after the first part of the AUTO SENSOR or
between COOK and ROAST TIME cycles to allow you to stir, rotate or rearrange food orto add ingre
dients. NOTE: The oven will remain off until you touch START.
Pause is automatic between timed and temperature cycles
PAUSE is automatic between a timed cooking cycle and a temperature cycle. Your oven will
automatically pause between a timed (COOK or QUICK DEFROST) cycle and a temperature
(PROBE TEMP or AUTO TEMP) cycle. “Prob" will show on the Display to remind you to plug in the
probe. Touch START to continue cooking.
21