Carl Goldberg GBGP0102 - Manual

™
REQUIRED ITEMS
Adhesives & Building Supplies
Great Planes ® Pro ™ aliphatic
resin (wood glue) (2 oz. [60g],
GPMR6160)
1/2 oz. [15g] Medium Pro CA+
(GPMR6007)
1 oz. [30g] Thick Pro CA- (GPMR6014)
CA applicator tips (HCAR3780)
Pro 30-minute epoxy (GPMR6047)
Pro 6-minute epoxy (GPMR6045)
2 oz. [60g] Foam Safe CA Activator (GPMR6035)
Great Planes Easy-Touch hand sander (GPMR6169)
Easy-Touch
™ sandpaper assortment (GPMR6189)
Drill bits: 5/64" [2mm], 7-64" [2.8mm], 5/32 [4mm], 3/8"
[9.5mm]
Masking tape (TOPR8018)
18" flexible steel rule (HCAR0460)
6" steel pocket rule (found at most hardware stores)
Builder’s Triangle Set (HCAR0480)
#11 hobby knife (HCAR0105)
#11 blades (5-pack, HCAR0211)
1" [25.4mm] Steel C-clamp (you’ll need 4)
24" [610mm] bar clamp
Weighted bags (use steel shot or BBs)
Rotary tool such as Dremel
Rotary tool reinforced cut-off wheel (GPMR8200)
Sanding drum – coarse (DRER0965)
Plan Protector 25' [7.6m] roll (GPMR6167)
Latex foam rubber 1/2" [13mm] (HCAQ1050)
Denatured alcohol
Hobbico Retractable Fabric Tape Measure (HCAR0478)
Finishing Supplies
For a painted surface, we recommend using any fuel-
proof spray paint such as Top Flite ® LustreKote. Most
household spray paints available at your local hardware
store will also work, but be sure to test the paint to make
sure it is indeed fuel-proof.
For a bare-wood finish, we recommend
the following options:
Great Planes Finishing Resin (GPMR6049)
OR
Your choice of oil-based polyurethane varnish
Standard household paint brush 1" – 1-1/2" [25-38mm]
HobbyLite
™ balsa colored wood filler (HCAR3401)
ASSEMBLY INSTRUCTIONS
™