beautypg.com

Cabane struts – Carl Goldberg GPMA1926 Monster Pitts Electric ARF User Manual

Page 13

background image

13

5.

Drill the outer hole on the control horn with a

1/16” drill and install one of the pushrod con

nectors.

6.

Put the pushrod through the hole in the servo

connector, center both the rudder and servo,
and tightened the set screw on the pushrod
connector.

7.

Repeat the procedure for the elevator

pushrod on the other side.

CABANE STRUTS

1.

Collect the following items:

(2) front struts `( shorter ones)

(2) rear struts (longer ones)

(8) #2 x 3/8” screws

2.

Identify the front and rear struts. The rear are

longer than the front. Identify the left and right

of both front and rear. When on the proper

side of the fuselage, the strut will lean to the

rear of the plane.

3.

Screw the struts in place in the pre-made holes

on each side of the fuselage using the #2

screws.