Braeburn 5220 User Manual - Manual (Page 20)

BACK NEXT
Setting Individual Days (7 Day Commercial)
1. Press the PROG button. The display will switch to
programming mode. M (Monday) will appear and
the hour will flash.
2. Press SYSTEM to select HEAT or COOL.
3. Press DAY/TIME to select an individual day.
4. Press the SpeedBar ® up or down to adjust the hour
for the OCCUPIED event. Press NEXT .
5. Press the SpeedBar up or down to adjust the
minute for the OCCUPIED event. Press NEXT .
6. Press the SpeedBar up or down to adjust the
temperature for the OCCUPIED event. Press NEXT .
7. Press the SpeedBar up or down to adjust the fan
setting for the OCCUPIED event. Press NEXT .
8. Repeat steps 4-7 for your UNOCCUPIED event.
9. If needed, repeat steps 3-7 to select other individual days.
10. If needed, repeat steps 2-9 to program the opposite mode (HEAT or COOL).
11. Press
RETURN to exit.
User Manual 20
BACK and NEXT are
secondary functions of the
PROG and HOLD buttons.