Braeburn 5320 User Manual User Manual
Page 27
27 User Manual
Adaptive Recovery Mode (ARM
™
)
Adaptive Recovery Mode is a feature enabled/disabled in the Installer Settings (See Installer Manual).
If enabled, the feature is automatically present while in programmable mode.
Adaptive Recovery Mode tries to reach your desired heating or cooling temperature at the time you have set in
your current program schedule, after a setback period. For example, if you set your heat down to 62° at night
and have a set point of 70° scheduled for 7:00 AM, the thermostat may turn on your heating system early in
order achieve a temperature of 70° by 7:00 AM.
This feature does not operate when the thermostat is in HOLD mode, if the program is temporarily overridden or
if emergency heat is selected on a multistage heat pump system.
Circulating Fan Mode
Circulating Fan Mode is selected by touching the FAN
TouchPad
™
until CIRC appears in the display.
The system fan will run intermittently to help circulate air and
provide more even temperature distribution when the heating or
cooling system is not active.