Braeburn 5320 User Manual - Manual (Page 20)

Setting Individual Days (7 Day Commercial)
1. Touch the PROG TouchPad ™ . The display will switch to
programming mode. M (Monday) will appear and the hour
will flash.
2. Touch SYSTEM to select HEAT or COOL.
3. Touch DAY/TIME to select an individual day.
4. Press the SpeedBar ® up or down to adjust the hour for the
OCCUPIED event. Touch NEXT .
5. Press the SpeedBar up or down to adjust the minute for
the OCCUPIED event. Touch NEXT .
6. Press the SpeedBar up or down to adjust the temperature
for the OCCUPIED event. Touch NEXT .
7. Press the SpeedBar up or down to adjust the fan setting
for the OCCUPIED event. Touch NEXT .
8. Repeat steps 4-7 for your UNOCCUPIED event.
9. If needed, repeat steps 3-7 to select other individual days.
10. If needed, repeat steps 2-9 to program the opposite
mode (HEAT or COOL).
11. Touch RETURN to exit.
User Manual 20