Braeburn 5320 User Manual User Manual
Page 19
19 User Manual
Programming a 7 Day Commercial Schedule
The 7 day commercial programming mode gives you the option to program individual days (1 day at a time) or to
use SpeedSet and program the entire week (all 7 days) with a 2 event program schedule.
Setting All 7 Days at Once (SpeedSet
®
)
NOTE: Setting all 7 days at once will copy over any previously programmed individual days.
1. Hold the
PROG
TouchPad
™
for 3 seconds. The display will
switch to SpeedSet programming mode. All 7 days of the
week will appear and the hour will be flashing.
2. Touch
SYSTEM
to select HEAT or COOL.
3. Press the SpeedBar
®
up or down to adjust the hour for
the OCCUPIED event. Touch
NEXT
.
4. Press the SpeedBar up or down to adjust the minute for
the OCCUPIED event. Touch
NEXT
.
5. Press the SpeedBar up or down to adjust the temperature for
the OCCUPIED event. Touch
NEXT
.
6. Press the SpeedBar up or down to adjust the fan setting for the
OCCUPIED event. Touch
NEXT
.
7. Repeat steps 3-6 for your UNOCCUPIED event.
8. If needed, repeat steps 2-7 to program the opposite mode (HEAT or COOL).
9. Touch
RETURN
to exit.