Enable wi-fi on thermostat – Braeburn 7320 Startup Guide User Manual

Page 6

Text mode
Original mode

Enable Wi-Fi on Thermostat

5.1

On the thermostat, press and hold the

CONFIG and DAY/TIME buttons for

3 seconds.

5.2

The display will alternate the words WIFI

and SKIP and the symbol will flash.

NOTE:

If you are already connected to a Wi-Fi

network, you will see the network name (SSID)

displayed 4 characters at a time with a solid
symbol. If needed, clear Wi-Fi settings and return
to step 5.1 (See “Clear your Wi-Fi settings”). If you
are not connected to 24 VAC the thermostat will
not display any Wi-Fi information.

5.3

Press the up or down button until the

word SCAN appears in the display.