BASO GM7000 Series Multi-function Gas Control Valve - Manual (Page 6)

6 GM-7000 Series CE Approved Gas Control Valve Installation Instructions
Technical Specifications (continued)
Agency Listings CSA (AGA/CGA) Certificate Number 229521-1656041
EC Certificate Number EC-86/11/041
Australian Gas Association Certificate Number 7934
Specification
Standards EN 126 and 161
Standards Complying with the Directive
Standards Complying with the Low Voltage Directive
Australian Standards AS 4624 and AS 4629
Canadian Standard CSA 6.5 and 6.20
ANSI Standards Z21.21 and Z21.78
Performance specifications are nominal and conform to acceptable industry standards. All agency certification of BASO products is performed
under dry and controlled indoor environmental conditions. Use of BASO products beyond these conditions is not recommended and may void
the warranty. Product must be protected if exposed to water (dripping, spraying, rain, etc.) or other harsh environments. The original
equipment manufacturer or end user is responsible for the correct application of BASO products. Consult BASO Gas Products LLC for
questionable applications. BASO Gas Products LLC shall not be liable for damages or product malfunctions resulting from misapplication or
misuse of its products.
Refer to the GM-7000 Series CE Approved Gas Control Valve Product Bulletin (BASO-PB-GM7000) for necessary information on operating
and performance specifications for this product.
1007 South 12 th Street
PO Box 170
Watertown, WI 53094
www.baso.com
1-877-227-6427 (1-877-BASOGAS) Published in U.S.A.