BASO BGAH96 Series BASOTROL - Manual (Page 5)

BASOTROL CE Approved Class B Shutoff Gas Valve Installation Instructions 5
Technical Specifications
Product BGA171/H96 Series BASOTROL® CE Approved Class B Shutoff Gas Valve
Types of Gas 2nd (Natural Gas) or 3rd (LP Gas) Family Gases
North America:
0.5 psi Maximum Operating Pressure
Europe: 100 mbar
Reverse Pressure Ratings 20 in. W.C. (50 mbar [5 kPa]) Class B (EN 161)
Permissible Ambient (Surface)
Temperature -20 to 175ºF (-29 to 79ºC) BGA171
32 to 158ºF (0 to 70ºC) H96
Body Connections 1/2, 3/4 NPT; 1/2 BSPP (Thread ISO 7-Rp)
Electrical Ratings 25 VAC, 50/60 Hz, 0.595A
120 VAC, 50/60 Hz, 0.13A
240 VAC, 50/60 Hz, 0.063A
12 VDC,1.0A
25 VDC, 0.675A
Pressure Connections 1/8 NPT left, right, left and right, left/right and bottom, or bottom
1/8 BSPP left, right, left and right, left/right and bottom or bottom; or none
Pilot Connections 1/8 NPT left, right, or left and right
1/8 BSPP (Thread ISO 7-Rp left, right, left and right; or none
Dirt Strainer 0.036” (0.9 mm) Mesh
Operating Time Rating 100% Continuous
Valve Timings Closing Time ≤1 Second; Opening Time ≤1 Second; Dead Time <1 Second
Power Ratings 15 VA per Coil (except 25 VDC, 17 VA)
Electrical Connections 3-Tab Solenoid Coil, 2 x 1/4 in. (6.35 mm) Tabs + 1/4 in. (6.35 mm) Earth Ground Tab
2-Tab Solenoid Coil, 2 x 1/4 in. (6.35 mm) Tabs
Valve Torsion Group Group 2 (EN 161)
Coil Insulation Class Class F
Packaging Bulk pack supplied to original equipment manufacturer (individual pack optional).
Bulk Pack Quantity 40
Bulk Pack Weight 48 lb (21.8 kg)
Agency Listing CSA Certificate Number 229521-1656058
EC Type Examination Certificate Number EC-86/11/040
UL Recognized File Number MH5939
Specification Standards EN 161
Standards Complying with EMC Directive
Standards Complying with Low Voltage Directive
ANSI Standards Z21.21
Canadian Standards CAN1-6.5
Performance specifications are nominal and conform to acceptable industry standards. All agency certification of BASO products is performed under dry
and controlled indoor environmental conditions. Use of BASO products beyond these conditions is not recommended and may void the warranty.
Product must be protected if exposed to water (dripping, spraying, rain, etc.) or other harsh environments. The original equipment manufacturer or end
user is responsible for the correct application of BASO products. Consult BASO Gas Products LLC for questionable applications. BASO Gas Products
LLC shall not be liable for damages or product malfunctions resulting from misapplication or misuse of its products.
Refer to the BGA171/H96 Series BASOTROL® CE Approved Shutoff Gas Valve Product Bulletin (BASO-PB-BGA171/H96) for necessary information on
operating and performance specifications for this product.
1007 South 12th Street
PO Box 170
Watertown, WI 53094
www.baso.gas
1-877-227-6427 (1-877-BASOGAS) Published in U.S.A.