BASO BGA110 User Manual
Page 5
BGA Series Shutoff Gas Valve Installation Instructions 5
Repairs and Replacement
Table 1: Replacement Solenoid Coil
(BGA158/BGA171)
Part Number
Description
RSDA95A-12
12 VDC; 2-tab 10.5 VA Coil
RSDA95A-25
25 VAC; 50/60 Hz; 3-tab 10.5 VA Coil
RSDA95A-25V
25 VDC; 3-tab 11.5 VA Coil
RSDA95A-120
120 VAC; 50/60 Hz; 3-tab 10.5 VA Coil
RSDA95A-240
240 VAC; 50/60 Hz; 3-tab 10.5 VA Coil
Table 2: Replacement Solenoid Coil (BGA110)
Part Number
Description
RSDA16A-12
12 VDC; 2-tab 15 VA Coil
RSDA16A-25
25 VAC; 50/60 Hz; 3-tab 15 VA Coil
RSDA16A-25V
25 VDC; 3-tab 17 VA Coil
RSDA16A-120
120 VAC; 50/60 Hz; 3-tab 15 VA Coil
RSDA16A-240
240 VAC; 50/60 Hz; 3-tab 15 VA Coil
!
CAUTION:
Risk of Electric Shock.
Disconnect power supply before making electrical
connections to avoid electric shock.
!
WARNING:
Risk of Explosion or Fire.
Shut off the gas supply at the main manual shutoff
valve before installing or servicing the BGA Series.
Failure to shut off the gas supply can result in the
release of gas during installation or servicing, which
can lead to an explosion or fire, and may result in
severe personal injury or death.
!
WARNING:
Risk of Explosion, Fire, or
Electric Shock.
Label all wires before they are
disconnected when replacing or servicing the BGA
Series. Wiring errors can cause improper or
dangerous operation and may result in an explosion,
fire, or electric shock leading to severe personal
injury or death.
Field repairs must not be made to the BGA Series
valve. Any attempt to repair this assembly voids the
manufacturer’s warranty. For a replacement valve,
contact the original equipment manufacturer or the
nearest BASO Gas Products distributor.