BASO E Series AGA - Manual (Page 6)

6 E Series EC/AGA Approved Intermittent Pilot Ignition Control Installation Instructions
Technical Specification
Product EC/AGA Universal Intermittent Pilot Ignition Control
Ignition Type Indirect
Ignition Source High voltage spark, capacitive discharge
High Voltage Cable
Maximum Length 1,220 mm (48 in.) (Resistive wire recommended, rated for at least 15Kv.)
Flame Sense Cable
Maximum Length 1,220 mm (48 in.)
Flame Detection Means Flame Rectification
Flame Detection Type Local or Remote
Minimum Flame Current 0.15 microamperes
Flame Failure Response
Time 2 seconds maximum
Maximum Spark Gap 5.1 mm (0.2 in.)
Power Requirements Control:
Operation Current: 24 VAC (+/- 20%), 50/60 Hz
0.2 A nominal + valves
Contact Rating Main Valve:
Pilot Valve:
Alarm Output 2 A maximum
2 A maximum
1 A maximum
Wiring Connections 6.35 mm (1/4 in.) male spade
Burner Rating 117 kW (400,000 Btu/hr)
Ambient Operating and
Storage Temperature -40 to 77
°C (-40 to 176°F)
Humidity 95% RH noncondensing
Type of Gas Natural, Liquefied Petroleum (LP), Manufactured, Mixed or LP Gas-Air Mixture
Packaging Bulk pack supplied to original equipment manufacturer (individual pack [-1AAC] or overpack
Bulk Pack Quantity 25
Pack Weight Bulk pack (-1AAD) 6.36 kg (14 lb)
Individual pack (-1AAC) .454 kg (1 lb.)
Agency Listing EC Certification Number EC-86/10/147
AGA Certification Number 7811
Specifications Standards ANSI Standard Z21.20
CAN/CSA-C22.2 No. 199
The performance specifications are nominal and conform to acceptable industry standards. All agency
certification of BASO products is performed under dry and controlled indoor environmental conditions. Use of
BASO products beyond these conditions is not recommended and may void the warranty. If the product is
exposed to water (dripping, spraying, rain, etc.) or other harsh environments, it must be protected. The original
equipment manufacturer or end user is responsible for the correct application of BASO products. For questionable
applications, please consult BASO Gas Products LLC. BASO Gas Products LLC shall not be liable for damages
or product malfunctions resulting from misapplication or misuse of its products
1007 South 12 th Street
PO Box 170
Watertown, WI 53094
www.baso.com
1-877-227-6527 (1-877-BASOGAS Published in U.S.A.