BASO BGQ15HAA-1 - Manual (Page 16)

16 BGQ15HAA-1 Retrofit Spark Ignition System Installation Instructions
Technical Specification
Product BG1600M10EK-1AA Intermittent Pilot Ignition Control
Ignition Type Indirect
Ignition Source High voltage spark, capacitive discharge
High Voltage Cable
Maximum Length 48 in. (1,220 mm) (Resistive wire recommended, rated for at least 15kV.)
Flame Sense Cable
Maximum Length 48 in. (1,220 mm)
Flame Detection Means Flame Rectification
Flame Detection Type Remote
Minimum Flame Current 0.15 microamperes
Flame Failure Response
Time 2 seconds maximum
Maximum Spark Gap 0.2 in. (5.1 mm)
Number of Trials Before
100% Shutoff One
Trial-for-Ignition Time Infinite
Prepurge Time None
Inter-Purge Time 5 seconds
Automatic Recycle Delay
Period None
Power Requirements Control:
Operation Current: 24 VAC (+/- 20%), 50/60 Hz
0.2 A nominal + valves
Contact Rating Main Valve:
Pilot Valve: 2 A maximum
1 A maximum
Wiring Connections 1/4 in. (6.35 mm) male spade
Maximum Firing Rate 400,000 Btu/hr (117 kW)
Ambient Operating and
Storage Temperature -40 to 170
°F (-40 to 77°C)
Humidity 95% RH noncondensing
Type of Gas Natural, Liquefied Petroleum (LP), Manufactured, Mixed or LP Gas-Air Mixture
Packaging Bulk pack supplied to original equipment manufacturer (25 per box)
Individual pack (1 per box)
Individual overpack (20 per box)
Pack Weight Bulk pack 14 lb (6.36 kg)
Individual pack 1 lb (.454 kg)
Individual overpack 18 lb (8.17 kg)
Agency Listing CSA Certificate Number 246569-2161442
Specifications Standards ANSI Standard Z21.20
CAN/CSA-C22.2 No. 199
The performance specifications are nominal and conform to acceptable industry standards. All agency certification of BASO products is
performed under dry and controlled indoor environmental conditions. Use of BASO products beyond these conditions is not recommended and
may void the warranty. If the product is exposed to water (dripping, spraying, rain, etc.) or other harsh environments, it must be protected. The
original equipment manufacturer or end user is responsible for the correct application of BASO products. For questionable applications, please
consult BASO Gas Products LLC. BASO Gas Products LLC shall not be liable for damages or product malfunctions resulting from
misapplication or misuse of its products.