Awntech DESTIN - Manual (Page 4)

4
• String level
• Tape Measure
• Chalk line
• An Assistant (two, if awning is more than 12’ long)
SEE THE FOLLOWING APPLICATIONS FOR SPECIFIC SIZES OF TOOLS AND HARDWARE
REQUIREMENTS
NOTE: There are many different building configurations and surfaces on which to mount your Beauty-Mark
®
Retractable Awning. AWNTECH provides the most common of these: WALL MOUNTING BRACKETS in its
standard packaging. Because there are so many building surfaces, Awntech does not provide mounting bolts
and hardware. Read carefully to
determine whether you need another type of bracket and read the follow
sheets to determine the types and sizes of screws, bolts, anchors, lumber and tubing you may need to purchase
for your specific needs.
TYPES OF MOUNTING BRACKETS
• Wall Mounting Brackets These are the most commonly used brackets. They are included with all
awnings. This bracket is designed for any flat exterior wall mounting surface with a horizontal band at
least 10” tall, at least 8’-0” from the eave to the surface of the patio. It can also be mounted on a fascia
(with guttering removed) higher than 7’-0” and lower than 9’6” from the patio to the bottom of the
fascia.
Wall Bracket
Measurements: Soffit Bracket
Measurements:
Roof Bracket Measurements:
Height 5.5" Height 8" Height 9"
Width 2.25" Width 1 7/8" Width 3"
Depth 3" Depth 4 5/8" Depth 9"
Between the holes 3.75"
Between the holes
(top)
2 3/4"
Between the holes
(Base)
2 3/8"-2 3/8"-1.1/4"
Between the holes
(back)
3" (Front to back)