Important, Awning sizes available – Awntech DESTIN User Manual
Page 3

3
IMPORTANT:
Retractable awnings are not designed to be left extended (open) during windy, rainy,
snowy, icy or hail conditions.
Do not leave the awning extended during extreme weather conditions such as wind, rain,
snow and ice. Extreme weather conditions may cause the arms to break and can cause
personal or property damage. Awntech does not take any responsibility for weather related
damages and/or improper use or handling.
Congratulations and thank you for purchasing your Beauty-Mark
®
Retractable Awning by Awntech. We
at Awntech, wish you, your family and friends many enjoyable gatherings beneath it. As you can see,
the awning is fully assembled, so all you have to do is install the brackets, slide the awning into the
brackets, secure the awning in the brackets, make some adjustments …and enjoy!
BEFORE YOU START: Please read instructions completely prior to attempting installation.
Damage to the awning during installation is not covered by the warranty. After reading, if
you feel that you still need additional installation assistance, please contact a local contractor
for professional installation.
TIME REQUIRED FOR INSTALLATION NUMBER OF INSTALLERS REQUIRED:
Approximately 1 hour 2-3 depending on size
INCLUDED PARTS LIST:
• Beauty-Mark
®
Retractable Awning (arrives completely assembled with fabric canopy)
• 2-6 Wall Mounting Brackets & Hardware - Depending on Size (see chart below)
• Rocker Arm or Crank Handle
• Remote Control (if motorized unit was purchased)
• Owner’s Manual
Awning Sizes Available:
Width
Standard Projection*
Optional Projection*
Brackets
5'
3'
n/a
2
8'
7'
n/a
2
10'
8'
n/a
2
12'
10'
n/a
3
14'
10'
12'
3
16'
10'
12'
4
18'
10'
12'
5
20'
10'
12'
5
24'
10'
12'
6
*The projection is measured from the wall to the front bar
REQUIRED ITEMS FOR INSTALLATION:
• Drill
• Full wood/metal and masonry bit sets (3/8 shank-1/2 bit masonry bit for masonry applications)
• 2-3 16’ Extension Ladders
• Stud Finder
• Full ratchet and socket set
• Screwdriver set