Avlink PG-V1 - Manual (Page 15)

14
Chapter 4 Troubleshooting
1. If there is no image when using the PG-V1, please
ensure the following matters:
a. If it is unable to switch onÆthere is a possibility of
fault battery or inferior battery. Please connect it with
the transformer.
b. If it is able to switch on but there is no imageÆ
„
Lower the resolution or change the resolution and
vertical frequency.
„
Please ensure the compatibility of Sync mode:
H/V or SOG of the monitor.
2. Which should be care for when using the PG series first
time?
After purchasing and before using the PG series first
time, please charge it continuously for more than 16
hours.
3. What is the Pattern Generator’s function?
a. Use to test and maintain studio equipment, such as
monitor, cabling, and recording equipment.
b. For a TV engineer or technician wants to test and
calibrate a DTV monitor during repair.
c. A home-theater user wants to get the best results out
of the DTV equipment.
d. A studio installer wants to test cables and equipment
so that can get the best effect.
e. For the DTV sets seller to show side by side
comparisons of quality.
f. For teacher to train their students about the latest
DTV quality test technologies.
g. To test a new DTV set whether compatibility with the
ATSC standards.
4. How to save the changed setting values?
The PG series will save the last changed setting values
automatically.
5. When should I have to charge the battery?
We suggest you to charge the battery when the battery
power indicator has become low, it is not appropriate to
charge the battery when the battery is consume
thoroughly.