Avlink PG-V1 - Manual (Page 12)

11
P02 Blinking mode configuration:
Press the set indicated key to enter the black and white
setting configuration as below (you can set the black and
white blinking frequency (frames/value) here):
„
“▲”: Increase the BLK or WHT blinking frequency value.
The value is up to 255.
„
“▼”: Decrease the BLK or WHT blinking frequency
value.
„
“ ▲ ”,” ▼ ”: Switch between BLK and WHT options.
„
“ ”: Confirm the changed value.
) 1. Both BLK/WHT are the condensations for
Black/White.
2. The bigger Value is set, the lower blinking frequency
is supported.
3. When the value is 001, click “▼” indicated key to
recycle the 255 value.
3.3.3 Sync configuration
Press the Sync indicated key, the Sync configuration
screen will be showed as below:
a. INFO: Press the INFO indicated key, the Info
configuration screen will be showed as below: