Avlink HX-331616 User Manual

Page 30

Matrix Switching System—User Manual

7.2.1 Main Operation Interface

Refer to the main window as above, the marked blue area shows crossing matrix of

output ports 001-016 and input ports 001-016. You can slide the scrollbar on the Input /

Output area to view all configured ports. For the basic operation is described as below:

Examples for selecting Matrix Switcher functions:

Example: Now there is a Matrix Switcher having all the input/output ports properly

connected to the equipment. If you want to set channel 1 input to channel 2, 3 and 4

output; channel 3 inputs to channel 1 output. There are 2 ways to implement the

switching. Please follow the ways and steps to finish the switching functions:

First way:

Directly click on the corresponding icons on the Matrix

to transform them into

to complete the switching operation.

Second way:

Step 1: First select the “Output” number keys 002, then select 003 and final select 004

to the right of the blue configuration area, and select the “Input” number key 001 to the

bottom. Then, press consecutively the previously selected “Output” number keys 002,

003 and 004. This way, you have selected “Input” 001 and “Output” 002, 003 and 004

switching.

Step 2: First select the “Output” number key 001 to the right of the blue configuration

area, and select the “Input” number key 003 to the bottom. Then, press the previously

selected “Output” number key 001. This way, you have selected Input 03 and Output

001 switching.

Upon completion of the above steps, you have actually completed the switching

operation of having channel 1 input to channel 2, 3 and 4 outputs while at the same time

successfully switched from channel 3 input to channel 1 output.

The main configuration window also shows you some function buttons to easy operation:

Switch Tab: Click “Switch” tab to show the main configuration window.

Audio Tab: Click the “Audio” tab to show the audio related configuration window.

Video Tab: Click the “Video” tab to show the video related configuration window. For

more information, refer to

7.2.4 EDID Configuration Function