Avlink HX-331616 - Manual (Page 13)

Matrix Switcher Series—User Manual
12
ƒ IR EXT: This is used to connect the IR Receiver Cable for the Matrix Switcher Remote
Controller. Refer to 錯誤! 找不到參照來源。.
ƒ INPUT1~16: Matrix Switcher Input jacks are connected to the Blu-ray players, DVD
players, STBs or other source devices.
ƒ OUTPUT1~16: Matrix Switcher Output jacks are connected to the HDTVs, projectors
or other sink devices.
HDMI Type A Connector pin definition:
Pin # Signal Pin # Signal
1 TMDS Data2+ 11 TMDS Clock Shield
2 TMDS Data2 Shield 12 TMDS Clock-
3 TMDS Data2- 13 CEC (NC on device)
4 TMDS Data1+ 14 Utility (NC on device)
5 TMDS Data1 Shield 15 DDC-SCL
6 TMDS Data1- 16 DDC-SDA
7 TMDS Data0+ 17 DDC-Ground
8 TMDS Data0 Shield 18 +5V Power
9 TMDS Data0- 19 Hot Plug Detect
10 TMDS Clock+
ƒ IR Tx1~16 Ports: Used to connect to the IR Blaster Cable for IR pass-through.
IR Blaster Pin Definitions:
ƒ IR Rx1~16 Ports: Used to connect to the IR Receiver Cable for IR pass-through.
IR Receiver Pin Definitions:
NC
P+
N-
GND
+5V
Signal