Cypress enCoRe CY7C64215 - Manual (Page 23)

CY7C64215
Document 38-08036 Rev. *C Page 23 of 30
AC Digital Block Specifications
The following table lists guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and 0°C < T
A
< 70°C, or 3.0V to 3.6V and 0°C < T
A
< 70°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and are
for design guidance only.
AC External Clock Specifications
The following tables list guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and 0°C < T
A
< 70°C, or 3.0V to 3.6V and 0°C < T
A
< 70°C, respectively. Typical parameters apply to 5V and 3.3V at 25°C and are
for design guidance only.
Table 21. AC Digital Block Specifications
Function Description Min Typ Max Unit Notes
Timer Capture Pulse Width 50
[11]
– – ns
Maximum Frequency, No Capture – – 49.92 MHz 4.75V < Vdd < 5.25V.
Maximum Frequency, With Capture – – 25.92 MHz
Counter Enable Pulse Width 50
[11]
– – ns
Maximum Frequency, No Enable Input – – 49.92 MHz 4.75V < Vdd < 5.25V.
Maximum Frequency, Enable Input – – 25.92 MHz
Dead
Band Kill Pulse Width:
Asynchronous Restart Mode 20 – – ns
Synchronous Restart Mode 50
[11]
– – ns
Disable Mode 50
[12]
– – ns
Maximum Frequency – – 49.92 MHz 4.75V < Vdd < 5.25V.
CRCPRS
(PRS
Mode) Maximum Input Clock Frequency – – 49.92 MHz 4.75V < Vdd < 5.25V.
CRCPRS
(CRC
Mode) Maximum Input Clock Frequency – – 24.6 MHz
SPIM Maximum Input Clock Frequency – – 8.2 MHz Maximum data rate at 4.1 MHz due to
2 x over clocking.
SPIS Maximum Input Clock Frequency – – 4.1 MHz
Width of SS_ Negated Between Trans-
missions 50
[11]
– – ns
Trans-
mitter Maximum Input Clock Frequency – – 24.6 MHz Maximum data rate at 3.08 MHz due to
8 x over clocking.
Receiver Maximum Input Clock Frequency – – 24.6 MHz Maximum data rate at 3.08 MHz due to
8 x over clocking.
Table 22. AC External Clock Specifications
Parameter Description Min Typ Max Unit Notes
F
OSCEXT
Frequency for USB Applications 23.94 24 24.06 MHz
– Duty Cycle 47 50 53 %
– Power - up to IMO Switch 150 – –
μs
Note
11. 50 ns minimum input pulse width is based on the input synchronizers running at 24 MHz (42 ns nominal period).
[+] Feedback [+] Feedback