ALTANA LC 3 - Manual (Page 5)

BYK LC 3 Mains power
5
Mains power
You can either operate the measuring instrument with batteries or with the
plug-in power supply. The plug-in power supply provides the measuring in-
strument with low voltage (7.5 V ... 12 V DC). This saves the batteries.
Warning
The line voltage at the operating site must lie within the input voltage range
of the original plug-in power supply (see T
ECHNICAL DATA ).
Warning
Only use original plug-in power supplies (see T
ECHNICAL DATA ).
Switching on the measuring instrument
2
1
3
! Plug the jack (1) into the socket (2) of the measuring instrument.
! Connect the original plug-in power supply (3) to an easily accessible
mains socket.
! Press the <
> key.
Display test appears briefly on the display.
After this, the measuring instrument automatically switches to the mea-
suring mode. The display shows the relevant measured value.