ALTANA BYK-mac Manual - Manual (Page 31)

30
English
8.4 Organizer
An organizer file defines a measurement sequence
for user guidance, e. g. measuring a car body with
several checkzones. These files can be generated
with the auto-chart software and transferred to the
instrument.
Once an Organizer is selected, a menu appears for
Parameter 2 (Color).
After you have selected the appropriate color, a
selection menu appears for Parameter 3
(e.g.automotive paint line).
If ”Input Comment” is activated in the organizer, you
are prompted to enter additional information.
If “Input ID” is activated, you are prompted to enter a
code, e.g. the vehicle ID.
After definition of all parameters you are asked to
start a new test series.
If the answer is ”No”, the instrument returns to the
main menu.
If the answer is ”Yes”, the instrument goes to the
measurement mode.
In case the standard (color) has not been stored in
the instrument, you can measure it now. Please
proceed as described at ”Measure/New standard”.
Measure