ALTANA BYK-mac Manual - Manual (Page 10)

9
English
DANGER injuries possible
• Defects and extraordinary loads
If safe operation can no longer be presumed,
shut down the device and secure it against
unintended operation.
The device must be presumed unsafe to operate:
• if visible damage is evident
• if the instrument is no longer working
• if it has been stored for long periods under
adverse conditions
• after harsh treatment during shipping.
• Safety advices for batteries: Do not crush or
dismantle, do not heat or incinerate, do not
immerse in any liquid. This may cause explosion
or release harmful substances.
• Do not perform any repairs on the unit yourself.
The unit must be opened by trained
professionals only. Please contact our customer
service department in such cases.
• The measurement device may be disconnected
from any power source as follows:
a) by removing the battery compartment and/or
b) by disconnecting the USB-interface cable
and/or
c) by disconnecting the power supply unit plug
from the mains socket
Make certain that the power supply unit plug is
easily accessible.
• Use only the power supply included with delivery.
Safety instructions