A&D Weighing FX-300i-PT - Manual (Page 10)

8
2-2 FX-300i-PT
1. Place the balance on a solid table.
For details on the installation site, refer to
“3. PRECAUTIONS BEFORE USE”.
.
2. Install the fitting boss on the balance, then install
the evaporation trap base on the fitting boss.
3. Install the sample cup holder (30 mL) on the base.
When the 30 mL sample cup is used:
Insert the sample cup into the holder.
When the 5 mL sample cup is used:
Insert the sample cup holder (5 mL) into
the sample cup holder (30 mL), and then
insert the sample cup
Evaporation
trap
base
Fitting
boss
Sample cup
holder (5 mL)
Sample cup
holder (30 mL)
5 mL sample
cup 30 mL sample
cup