A&D Weighing SV-100 - Manual (Page 12)

10
3-3 Displaying the Viscosity Values
The viscosity values are displayed as below, depending on the unit selected and the viscosity range.
The correlation of the units are as follows: 1 mPa ⋅s = 0.001 Pa⋅s = 1 cP =0.01 P
3-3-1 SV-10
Use the MODE key to switch between mPa ⋅s (Millipascal second) and Pa⋅s (Pascal second), or
between cP (Centipoise) and P (Poise).
The unit selected at the factory before shipment is mPa ⋅s.
When the viscosity unit is mPa ⋅s or Pa⋅s:
Unit selected Viscosity
measured mPa ⋅s Pa⋅s
mPa ⋅s Display
Minimum
display
Unit Remarks Display
Minimum
display
Unit Remarks
0.30 0.0003
⏐ ｜
1 1.00 0.0010
｜ ｜
9.99
0.01
0.0099
0.0001
Digit
indicating
0.01 mPa
⋅s is
not displayed
10 10.0 0.0100
｜ ｜
99.9
0.1
0.0999
0.0001
100 100 0.100
｜ ｜
999
1
mPa ⋅s
0.999
0.001
1000 1.00 1.00
｜ ｜
10000 10.00
0.01 Pa ⋅s
Switches
to Pa ⋅s
10.00
0.01
Pa ⋅s
When the viscosity unit is cP or P:
Unit selected Viscosity
measured cP P
mPa ⋅s Display
Minimum
display
Unit Remarks Display
Minimum
display
Unit Remarks
0.30 0.0030
｜ ｜
1 1.00 0.0100
｜ ｜
9.99
0.01
0.0999
0.0001
10 10.0 0.100
｜ ｜
99.9
0.1
0.999
0.001
100 100 1.00
｜ ｜
999
1
cP
9.99
0.01
1000 1 0.0 10.0
｜ ｜
10000 100.0
0.1 P
Switches
to P
100.0
0.1
P