A&D Weighing SV-100 - Manual (Page 10)

8
3. DISPLAY AND KEYS
3-1 Display
Name Description
Standby mode Displays [- - - - -].
Measurement mode
Displays the viscosity value in real
time.
Viscosity display
Data hold mode
Freezes the display of the viscosity
value.
Viscosity units Displays the unit of viscosity.
Standby mode
Measurement mode
Displays the temperature value in
real time.
Temperature display
Data hold mode
Freezes the display of the
temperature value.
Temperature units Displays the unit of temperature.
Processing indicator
Blinks while the measurement is being performed. (While the
sensor plates are in vibrating motion)
Hold indicator Illuminates while the viscometer is in the data hold mode.
RsVisco link indicator
Illuminates while measurement is performed using RsVisco, the
graphing program contained in the WinCT-Viscosity (CD-ROM).
Calibration indicator Displays " C " in the calibration mode.
At one-point calibration
Blank display [ ]
Inputting
first point
Displays [ - - ]. Calibration mode ID
indicator
At two-point calibration
Inputting
second point
Displays [ - - ].