KEYENCE CV-X290 - Manual (Page 7)

7
*1 The letter at the end of the model number means the difference of the installed software function. For details, see the " CV-X Series User's Manual " .
*2 The PNP open collector is used for model types with P at the end.
*3 Models that have an Ethernet port installed on the CPU unit support Ethernet port direct connections.
*4 The CA-DC21E supports switching between PWM and DC methods. The CA-DC30E is Constant current control method and the CA-DC10E is fixed to the PWM method.
Main Specifications
Model name *1*2 CV-X290
Number of pixels
With LJ-V connected
• 512 (H) x 16384 (L), approx. 8,390,000 pixels
• 1024 (H) x 8192 (L), approx. 8,390,000 pixels
• 2048 (H) x 4096 (L), approx. 8,390,000 pixels
With CA-HX500C/HX500M connected
• 5,000,000-pixel mode: 2432 (H) x 2040 (V), approx. 4,960,000 pixels
• 2,000,000-pixel mode: 1600 (H) x 1200 (V), approx. 1,920,000 pixels
With CA-HX200C/HX200M connected
• 2,000,000-pixel mode: 1600 (H) x 1200 (V), approx. 1,920,000 pixels
With CA-HX048C/HX048M connected
• 470,000-pixel mode: 784 (H) x 596 (V), approx. 470,000 pixels
• 310,000-pixel mode: 640 (H) x 480 (V), approx. 310,000 pixels
• 240,000-pixel mode: 512 (H) x 480 (V), approx. 240,000 pixels
With CA-H2100C/H2100M connected
• 21,000,000-pixel mode: 5104 (H) x 4092 (V), approx. 20,890,000 pixels
• 5,000,000-pixel mode: 2432 (H) x 2050 (V), approx. 4,990,000 pixels
With CV-H500C/H500M connected
• 5,000,000-pixel mode: 2432 (H) x 2050 (V), approx. 4,990,000 pixels
With CV-200C/S200C/H200C/200M/S200M/H200M connected
• 2,000,000-pixel mode: 1600 (H) x 1200 (V), 1,920,000 pixels
• 1,000,000-pixel mode: 1024 (H) x 960 (V), approx. 980,000 pixels
With CV-H100C/H100M connected
• 1,000,000-pixel mode: 1000 (H) x 1000 (V), 1,000,000 pixels
With CV-035C/S035C/035M/S035M/H035C/H035M connected
• 310,000-pixel mode: 640 (H) x 480 (V), approx. 310,000 pixels
• 240,000-pixel mode: 512 (H) x 480 (V), approx. 240,000 pixels
Camera input
• With CA-EC80LJ installed: 1 LJ-V or up to 2 with the expansion unit CA-E800 (Supports LJ-V7001/7001P)
• With CA-EC80L installed: 1 Colour/monochrome area camera or up to 2 with the expansion unit CA-E800 (Supports CA-H2100C/H2100M and
CA-HX500C/HX500M/HX200C/HX200M/HX048C/HX048M, mixed connection possible)
• With CA-EC80HX installed: 1 Colour/monochrome area camera or up to 2 with the expansion unit CA-E800 (Supports CA-HX500C/HX500M/
HX200C/HX200M/HX048C/HX048M, mixed connection possible)
• With CA-EC80 installed: 2 Colour/monochrome area cameras or up to 4 with the expansion unit CA-E800 (Supports CA-HX500C/HX500M/HX200C/
HX200M/HX048C/HX048M and CV-H500C/200C/S200C/H200C/H100C/035C/S035C/H035C/H500M/200M/S200M/H200M/H100M/035M/S035M/
H035M, mixed connection possible)
Main processor for image processing Multi-core DSP (High-Speed)
Number of setting registrations Up to 1000 settings (depending on SD card capacity and setting contents) for SD card 1 and SD card 2 individually and external switching is possible
Number of reference images
Each setting supports 400 images/LJ-V, 900 images/area camera (depending on SD card capacity), compress and save functions and image
registration of position adjusted images.
Memory card
• SD card slot x2 (SDHC compatible)
• Supports OP-87133 (512 MB), CA-SD1G (1 GB: standard equipment on the SD1 slot), CA-SD4G (4 GB)
Interface
Control input
External trigger
input
4 points (2 of which support special function assignment)
Input rating: 26.4 V max., 3 mA min., simultaneous/individual capture with up to 4 cameras is possible
Can set individual trigger delays (0 to 999 ms) for each trigger input
Control input 16 points (4 of which support special function assignment) Input rating: 26.4 V max., 2 mA min.
Control output
Common output 27 points (11 of which support special function assignment, includes 4 high speed outputs), NPN open collector, 50 mA max. (30 V max.)
Total status output 1 point, NPN open collector, 50 mA max. (30 V max.) Supports total status hold control, one-shot output (1 to 9999 ms)
Monitor output
Analogue RGB output
XGA 1024 x 768 (24 bit colour, 60Hz)
Operation indicator Power supply, operation, ERROR LED display
RS-232C
Can perform numerical value output and control input/output or interface the CA series touch panel, supports a max. baud rate of up to 230400 bps
(Cannot be used with PLC-Links using the RS-232C port)
PLC-Link
• Can output numerical values and perform control input/output using the Ethernet or RS-232C port
(Cannot be used in conjunction with EtherNet/IP and PROFINET. When using the RS-232C port, nonprocedural RS-232C communication cannot
be used in conjunction.)
• The following PLCs are supported via link unit: *3
KEYENCE: KV-700 Series, KV-1000 Series, KV-3000 Series, KV-5000 Series, KV-5500 Series, KV Nano Series
Mitsubishi Electric: MELSEC A Series (RS-232C only), Q Series, L Series, FX Series (RS-232C only)
OMRON: SYSMAC C Series (RS-232C only), CJ/CS1/CP1 Series
YASKAWA Electric Corporation: MP900 Series (RS-232C only)/MP2000 Series
Ethernet
• Can output numerical values and perform control input/output
• Can output measured value and image data via the included PC programme, upload and download settings
• Supports FTP client and FTP server function
• VNC server (for non-PC clients, only displaying the monitor screen is supported)
• Supports BOOTP function
• 1000BASE-T/100BASE-TX/10BASE-T
USB
• Can output measured value and image data via the included PC programme, upload and download settings
• USB 2.0 only.
EtherNet/IP
• Numerical value and control input/output using the Ethernet port enabled (Cannot be used in conjunction with PLC-link / PROFINET).
• Cyclic (implicit) communication (max. 1436 bytes) possible. Message communication possible.
• Maximum connections: 32.
• In conformity with conformance test Version.CT10.
PROFINET
• Numerical value and control input/output using the Ethernet port enabled (Cannot be used in conjunction with PLC-link / EtherNet/IP).
• Cyclic communication (max. 1408 bytes) possible. Record data communication possible.
• In conformity with Conformance Class A
Mouse Possible to control various menus via an optional dedicated mouse (OP-87506: included with the controller)
Touch panel
Possible to operate settings via CA series touch panel using TOUCH PANEL port or RS-232C port
(When RS-232C is used, the nonprocedural communication and PLC-Links that use the RS-232C port cannot be used.)
Illumination control
By connecting the optional Illumination Expansion Unit CA-DC30E/21E/10E, lighting and intensity control for the LED illumination is possible. *4
CA-DC30E: 2ch/unit, up to 2 units can be connected, only supports dedicated illumination unit.
CA-DC21E: 2ch/unit, up to 4 units can be connected, Output voltage 12V/24V.
CA-DC10E: 2ch/unit, up to 1 unit can be connected, Output voltage 12V only, mixed connection with CA-DC30E/21E is not possible.
Language
Switched among English, Japanese, Simplified Chinese, Traditional Chinese, Korean, Thai, German, French, Italian, Mexican Spanish, Indonesian,
Vietnamese and Portuguese (Brazilian)
Rating
Power supply voltage 24 V DC ± 10%
Current consumption
With area camera
3.6A (When 2 cameras are connected), 4.6A (When 4 cameras are connected)
With LJ-V connected
2.6A (1 unit connected), 2.8A (2 units connected)
Figures indicate maximum load including rush current at start-up.
Environmental
resistance Ambient temperature 0 to +45°C
Relative humidity 35 to 85% RH (no condensation)
Weight Approx. 1600g