Inovonics Radius Administrator - Manual (Page 39)

User Administration
6.24.13 06320D © Inovonics, 2013 - www.inovonics.com 38
• Show all monitored devices: Shows all devices regardless of alarm
status.
• Show active/recent alarms: Shows only devices in alarm or recently in
alarm.
• Show quick message screen: Shows the quick message screen.
• Show manual alarm screen: Shows the manual alarm screen.
7 As desired, check the box next to “Show panic buttons” to display a soft
panic button on the screen which can be clicked to send an alarm.
8 If you want to prohibit this user from being able to confirm alarms from the
Radius software, check “Do not allow confirmation of alarms.”
9 Enter a title for the soft panic button in the “Panic button title” field.
10 As desired, change the rate at which the screen refreshes by entering the
desired number of seconds in the “Refresh rate” field.
11 Enter a password of at least five characters in the “New password” field,
and retype it in the “Retype password” field.
12 Click “Insert User.”