Hangar 9 Piper J-3 Cub 40 ARF - Manual (Page 5)

5
Before beginning the assembly of your J-3 Cub, remove each part from its bag for inspection. Closely inspect the
fuselage, wing panels, rudder, and stabilizer and for damage. If you find any damaged or missing parts, contact the place
of purchase.
If you find any wrinkles in the covering, use a heat gun or covering iron to remove them. Use caution while working
around areas where the colors overlap to prevent separating the colors.
This manual is divided into sections to help make assembly easier to understand, and to provide breaks between each
major section. Remember to take your time and follow the directions.
Horizon Hobby, Inc. guarantees this kit to be free from defects in both material and workmanship at the date of purchase.
This warranty does not cover any parts damaged by use or modification. In no case shall Horizon Hobby’s liability exceed
the original cost of the purchased kit. Further, Horizon Hobby reserves the right to change or modify this warranty without
notice.
In that Horizon Hobby has no control over the final assembly or material used for the final assembly, no liability shall be
assumed nor accepted for any damage of or caused by the final user-assembled product. By the act of using the product,
the user accepts all resulting liability.
Once assembly of the model has been started, you must contact Horizon Hobby, Inc. directly regarding any warranty
question that you have. Please do not contact your local hobby store regarding warranty issues, even if that is where you
purchased it. This will enable Horizon to better answer your questions and provide service in the event that you may need
any assistance.
If the buyer or user is not prepared to accept the liability associated with the use of this product, they are advised to
return this kit immediately in new and unused condition to the place of purchase.
For any additional questions please contact:
Horizon Hobby Product Support
4105 Fieldstone Road
Champaign, Illinois 61822
(877) 504-0233
www.horizonhobby.com
HAN100 – Heat Gun
HAN150 – Covering Glove
HAN101 – Covering Iron
HAN141 – Sealing Iron
Sock
Before Starting Assembly
Using the Manual
Warranty Information