Hangar 9 Piper J-3 Cub 40 ARF User Manual

Page 25



Step 10

Cut the cable into four equal pieces. Prepare one cable by

sliding the cable through a crimp, through the cable end,

then back through the crimp twice. Pull the excess cable

tight and use a crimping tool to complete the job. Repeat

for all four of the ends.



Step 11

Attach the four connectors to the brass fittings

of the stabilizer.



Step 12

Repeat Step 10, only passing the cable through the brass

fittings instead of the cable ends. The cables should have

very light tension.

Section 7: Installing the Stabilizer