Doepfer Pocket Electronic - Manual (Page 2)

Page 2 Pocket Electronic User's Guide
Table of contents
Table of contents ........................................................................................................................................ 2
Electrical safety / EMC compatibility........................................................................................................... 2
Warranty ..................................................................................................................................................... 3
Introduction................................................................................................................................................. 4
Connection and Installation ........................................................................................................................ 5
Power Supply (1) .................................................................................................................................... 5
Midi Out Socket (2) ................................................................................................................................. 5
Midi In Socket (3) .................................................................................................................................... 7
Connectors for the 16 controls (4) .......................................................................................................... 7
Connector for snapshot button and LED (5) ......................................................................................... 10
DIP Switches (6) ................................................................................................................................... 10
Mounting................................................................................................................................................... 11
Controls and Operation ............................................................................................................................ 12
Functions of the LED ............................................................................................................................ 12
Functions of the button (momentary switch) ........................................................................................ 12
Functions of the DIP switch .................................................................................................................. 13
Changing the preset during power on................................................................................................... 15
Check list .................................................................................................................................................. 16
Extent of delivery ...................................................................................................................................... 16
Appendix 1: Detailed description of the factory presets ........................................................................... 17
Appendix 2: Creating your own presets.................................................................................................... 29
Electrical safety / EMC compatibility
POCKET ELECTRONICS (abbreviated "PE" in the following) is a so-called OEM product
(OEM original equipment manufacturer) that cannot be used independently but has to be
combined with additional electrical or electronical equipment to become a working device (e.g.
potentiometers, switches, power supply, case/housing). The manufacturer of PE does not know
the final assembly of the complete device in which the PE is used as a part of the complete
device. The final responsibility with regard to electrical safety and electromagnetic
compatibility is up to the user who is assembling the complete device.
Electronic basic knowledge is required to install PE and to connect the controls resp.
control voltages. If you are not sure whether your knowledge is sufficient please consult an
expert. We cannot take back modules that became defective because of wrong installation or
wrong connection of the controls or voltages.
Please pay attention to the following items:
The power supply used in combination with the PE has to be a closed type (in Germany a
power supply with VDE approval is required). Normally an AC adapter with plastic case is used.
It is not allowed to use open power supplies whith open mains voltage access (e.g. via mains
lead, pcb tracks, electronic parts).
On the PE preventing measures against electromagnetic radiation are taken (RF filters at
the power supply input and the Midi lines). But it is impossible to estimate to what extend the
components added by the user affect the EMC properties of the complete assembly.
Therefore the complete device has to be shielded against electromagnetic radiation
(incoming and outgoing). These demands are normally met by a closed metal case that covers
the complete assembly. The metal case should be connected to GND of the PE.