beautypg.com

Warning – Cub Cadet ZD User Manual

Page 10

background image

EZT

®

7

Vehicle tires improperly inflated

Refer to vehicle manufacturer suggested pressure

Control linkage bent or out of adjustment

Repair or replace linkage, Pages 8 and 11

Bypass assembly sticking

Repair or replace bypass, Page 21

warning

do not attempt any servicing or ad-

justments with the engine running.

use extreme caution while inspecting

the drive belt assembly and all vehicle

linkage!
follow all safety procedures outlined in

the vehicle owner’s manual.

sEcTion 3. TrouBlEsHooTing

In many cases, problems with the EZT

®

are not

related to a defective transaxle, but are caused

by slipping drive belts, partially engaged bypass

valves, and loose or damaged control linkages.

Be sure to perform all operational checks and

adjustments outlined in Section 4, Service

and Maintenance, before assuming the pump

is malfunctioning. Table 3 below provides a

troubleshooting checklist to help determine the

cause of operational problems.

Table 3. EZT

Troubleshooting checklist

possible cause

corrective action

uniT opEraTEs in onE dirEcTion onlY

uniT is noisY

uniT Has no/low powEr

TransaXlE lEaKs oil

Control linkage bent or out of adjustment

Repair or replace linkage, Page 8

Drive belt slipping or pulley damaged

Repair or replace drive belt or pulley, Page 8

Oil level low or contaminated oil

Fill to proper level or change oil, Page 9

Excessive loading

Reduce vehicle loading, Page 8

Loose parts

Repair or replace loose parts

Bypass assembly sticking

Repair or replace linkage

Air trapped in hydraulic system

Purge hydraulic system, Page 10

Engine speed low

Adjust to correct setting

Control linkage bent or out of adjustment

Repair or replace linkage, Page 8

Drive belt slipping or pulley damaged

Repair or replace drive belt or pulley, Page 8

Oil level low or contaminated oil

Fill to proper level or change oil, Page 9

Excessive loading

Reduce vehicle loading, Page 8

Bypass assembly sticking

Repair or replace linkage

Air trapped in hydraulic system

Purge hydraulic system, Page 10

Debris buildup around transaxle

Clean off debris, Pages 2 and 8

Cooling fan damaged

Repair or replace cooling fan

Oil level low or contaminated oil

Fill to proper level or change oil, Page 9

Excessive loading

Reduce vehicle loading, Page 8

Air trapped in hydraulic system

Purge hydraulic system, Page 10

Damaged seals, housing, or gaskets

Replace damaged component

Air trapped in hydraulic system

Purge hydraulic system, Page 10

vEHiclE doEs noT drivE/TracK sTraigHT

uniT is opEraTing HoT

This manual is related to the following products: