COP-USA DVRH264-D1-8 - Manual (Page 61)

Digital Video Recorder User Manual
55
Fig 4.13 Network Configuration
This unit supports DHCP, PPPoE, and DDNS. Users enable network function, and configure IP address, DDNS,
transmission video parameters here. The following are the definitions of every option.
HTTP port:
the default is 80. If users change the value, they need add the port number when typing IP address in IE
address blank. I.e. set HTTP port to 82, IP address to 192.168.0.25. Users need input http://192.168.0.25:82 in IE browser.
Server port:
communication port
DHCP: enable DHCP. It wants this feature work, need enable DHCP in the router or virtual server. The unit will get IP
address automatically, not input IP, Subnet, and Gateway manually.
IP, Subnet, Gateway, DNS1 and 2:
IP address information. If users do not enable DHCP, it is necessary to input the value
manually here.
PPPoE:
enable PPPoE. If users connect the DVR to internet directly by ADSL, not through a router or a virtual server,
please enable it.