COP-USA DVRH264-D1-8 User Manual

Page 27

Digital Video Recorder User Manual

Fig 3.7 Record Setup

STEP2

Set Video quality, Frame rate, and Resolution.

STEP3

Have Audio checked if you input audio and want to record. Check Time stamp to record.

STEP4

Enable recording function for cameras in Record option.

Notice: If having camera unchecked here, it will not record in any recording mode.

STEP5

Set Alarm record hold time. It is for post alarm recording.

STEP6

Enable Recycle. It covers old video once HDD full. If you have it unchecked, it will stop recording auto once

HDD full.
STEP7

Click OK to finish.

Notice: The more space is used per hour, the higher the value of Video quality, Frame rate, and Resolution.

This Unit supports pre-alarm recording. However, no option to set the pre-alarm recording time, the default is 10 seconds

3.3.2 Manual Recording

Just press REC button on the front panel after quitting system setup. Press Stop button to stop recording.
Alternatively, press REC button on remote controller, click again to stop.
Or click REC button on the control bar with mouse, click again to stop.

This manual is related to the following products:

DVRH264-D1-16